Skip to main content

Coronavirus (COVID-19) screening clinic locations in Melbourne

Box Hill Hospital
 Advise patient they MUST NOT present to the Emergency Department
 Enter the Screening Clinic via ENTRANCE D on Thames Street, Box Hill through the transit lounge
 No appointment or prior phone call is needed, just turn up
 Current hours are 10am – 6pm. This is subject to change

The Alfred Hospital (City)
 Enter via Emergency Department as a separate clinic has been set up there
 55 Commercial Road Melbourne
 No set times as yet
 No appointment or prior phone call is needed, just turn up

Monash Medical Centre Clayton
 No appointment or prior phone call is needed, just turn up
 Clinic is found at 239 Clayton Road, Clayton
 Current hours are 10am – 6pm 7 days a week

Austin Hospital Heidelberg
 Not a drop in service
 Will turn away patients that have no symptoms
Must call the Coronavirus Hotline before attending clinic or Call Austin Hospital Coronavirus Hotline before attending clinic 9496 6606 (Austin Hospital Hotline 8am-5pm Monday-Friday)

Royal Melbourne Hospital Parkville
(Waiting message advises patient to hang up and call local GP if calling in regard to COVID-19)
 Can only attend once they have seen GP clinic and they advise to attend the clinic for COVID-19 screening/testing
 Open 10am-6pm 7 days a week
 300 Grattan St, Parkville VIC 3050

Northern Hospital
 Only has fever clinic (phone triage)
 Currently has no COVID-19 screening/testing clinic
 Patients can only call fever clinic if they have fever, even if they have travelled overseas recently – 8405 8844
(THIS IS A MUST AS THE HOSPITAL DOES NOT WANT THE FEVER HOTLINE FLOODED)

Sunshine Hospital
 Can only attend COVID-19 screening/testing clinic if they have:
 Sore throat, fever, cough (can have 1 or all symptoms)
 Overseas travel in the 14 days before the onset of illness
 Close contact with a known or suspected COVID-19 case

If they do not fit this criteria they will be turned away

Current as of 12/03/2020 6pm

Comments

Popular posts from this blog

Box Hill High School Zone

Parents are struggling with moving into a good reputable school for their kid(s). Here is the zone for Box Hill High School.   Good luck with house hunting!

The Bose Soundbar 700 Won't Connect to App

Bose has one of the best speaker sound. I learnt about Bose more than 25 years ago and still a fan.  I bought Soundbar 700 in 2018.  It took me a while to set it up but it has been giving me troubles once a while.  Recently, I was not able to connect Soundbar 700 with my phone.  Done the factory reset on the soundbar, it didn't work. I spent hours reseting everything multiple times and finally I found this article,  https://www.bose.com.au/en_au/support/articles/HC1380/productCodes/bose_soundbar_700/article.html .  Tweaking them all and finally got it to work again. I think the most important setting is to TURN WPS OFF on the router!  Hope it helps.

Brivis Heater - Error Code #69

My Brivis HX23 Heater broke down this week.  H01 Code #69.  This code was not even listed in the User Manual!  Searching around the web and here is what I found: Secret Reset: This is not in the User Manual.  On the networker controller press FUNCTION > 1 > 4 keys and the screen will go blank and come back on after 30 seconds, this has rebooted the main PCB and reset the fault code. Use this with caution as too much gas build up could cause an explosion. Use it only after the unit has enough time to air out the gas build up. What is Code #69 or any other unpublished codes?  The best way to find out is to open up the heater unit.   There is a little LCD on the PCB showing what error exactly is. (Note: Opening up the unit may void your warranty.)